This Filming sheet metal slitter machine is the accessorial equipment for Roll Forming Machine or folding machine, which is used to slit coil sheet to strips, and transfer it to support it. In order to get some nonstandard width length sheets. It has many advantages such as low noisy, stable running, simple operation and nice appearance etc.
Technical Parameters for Filming sheet metal slitter machine
Suitable coil width: 1300mm
Material strength: 230-300Mpa
Coil weight: 6T
The parameter of sheet coil: Inner diameter φ508 or 610mm
Outer diameter 1350 mm
slitter: 4 pairs
slit strip width: Min 60mm (adjustable)
Suitable coil thickness: 0.3~1.0mm
Length tolerance: +/_ 2mm in 3M in length
Slitting speed: 10 M/min
Motor power: Slitter power 3 KW
Hydraulic motor power 3 KW
Cutting: Cut to length automatically
Power source: 380V/3phase/50Hz (according to buyer requirement)
Machine Components for Filming sheet metal slitter machine
6T cantilever hydraulic decoiler, passively release for steel sheets.
The guiding device is used to guiding the steel sheets into right position for both sides.
3)Upper and down filming device
Install the filming in the axis, adjust both sections by the defender, the pressing device is combined by rubber roller. By the movement of rotating rubber roller, the sheet can be sticked into the surface of steel sheets when moving forward.
Remark: Taper shape for the filming roller to suit different size as required by client.
Adopt stop-cutting model: decelerating → stop → cutting → start. Inspect the sheet length and send out signal by encoder With the PLC control, the roller system will decelerate in advance, when reach settled length, the roll forming system will stop working, and cut.
a)There are several pairs of slitters to slitting the sheets into strips. The strips width can be adjusted by the slitter position. (2&3 in both left and right. One in the middle, with lower slitter fixed and the upper slitter movable)
b)The slitter adopt Cr12 die steel with quench treatment.
To support the finished sheets from the main machine. Change the height of supporter by the adjusting screw at the foot to suitable for the height of finished sheets.
The whole for Filming sheet metal slitter machine show
Packing and shipping about the for Filming sheet metal slitter machine
About our maxmach group
Product Categories : Slitting Machine